Hubbardton Forge 126601 - Manual (Page 2)

Assembly & Installation Instructions
A188
For 12-6601 & 12-6601F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22306 Rev A
(Figure 3)
To Install Double Glass with G9 Option
(Figure 3)
Component Parts
G Socket
H Bulb
(Included)
I Glass
J Spacer
K Bulb Shield
L Inner Glass
M Retaining Ring
N Retaining Ring Tool
1. Install light bulb (H). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
2. Slip glass (I), inner glass (N) & spacer (J) (Note orientation of spacer) over socket
(J).
3. Thread retaining ring (M) onto socket (G) using provided retaining ring tool (N).
4. Thread bulb shield (K) onto socket (G) (be careful not to over tighten). Future bulb
changes may be accomplished by snapping glass portion of barrier on and off
rather than unthreading the holder.
5. Restore electricity at main breaker.
To Install Glass with GU24 Option
(Figure 4)
Component Parts
G Socket
H Bulb
(Included)
I Glass
O Retaining
Ring
1. Remove retaining ring (M) from socket (G). Retaining Rings are shipped
installed.
2. Slip glass (I) over socket (G).
3. Thread retaining ring (O) onto socket (G). Do not over tighten.
4. Install light bulb (H).
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact
the dealer from which you purchased this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper
installation, lamping or use of this fixture.
(Figure 4)