Hubbardton Forge 126403 - Manual (Page 2)

Installation Instructions
A242
For Axis Medium Semi-Flush 12-6403 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24454
To Complete Assembly (Figures 3 & 4)
Component Parts
A Screws (3)
B Lower Assembly
C Upper Assembly
I Outer Glass
J Inner Diffuser
K Diffuser
1. Install diffuser (K) on lower assembly (B) so it rests on the three legs.
2. Install inner diffuser (J) and outer glass (I) onto lower assembly (B).
3. Raise lower assembly (B) with glass installed aligning so vertical bars pass through openings in the upper
assembly (C) as shown in Figure 4.
4. Turn lower assembly (B) clockwise until it stops in the locked position.
5. Install the three screws (A) on tab side of upper bar and tighten.
6. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 4) (Figure 3)