Hubbardton Forge 124905 - Manual (Page 2)

Assembly & Installation Instructions
A240
For Staccato Semi-Flush 12-4905 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24423
To Install Bulb and Glass
(Figure 3)
Component Parts
F Socket
G Bulb
(Included)
H Glass
I Retaining
Ring
J Retaining Ring Tool
K Metal Shade
1. Install light bulb (G). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
2. Slip metal shade (K) onto glass (H) so it rests on lip.
3. Slip glass (H) with metal shade (K) installed over socket (F) and thread retaining
ring (I) onto socket (F) using provided retaining ring tool (J).
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)