Hubbardton Forge 277650 - Manual

Shade Installation Instructions
C42
For Current Table Lamp 27-7650 & 27-7650C
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 26620
To Install Glass Diffuser (Figures 1 & 2)
Component Parts
A Finial
B Washer
C Diffuser
D Shade
E Socket
F Threaded
Stud
1. Carefully unpack the lamp from the carton.
2. Remove finial (A) and washer (B) from threaded stud (F)
and save for later use. Finial and washer are shipped
installed.
3. Install bulbs. “C” version bulbs are included.
4. Slip shade (D), diffuser (C) and washer (B) onto threaded
stud on top of socket (E). See Figure 2 for washer
orientation.
5. Thread finial (A) onto threaded stud (F) on socket (E) and
tighten until snug. Be careful not to over tighten.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
Figure 2
Figure 1