Hubbardton Forge 272710 - Manual

Assembly Instructions
C23
For Formae Portables 27-2710 & 27-2720
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 21125 Rev A
To Install Glass (Figure 1)
Component Parts
A Retaining Ring
B Glass
C Lamp
Socket
D Socket Tool
H White Washer
1. Remove retaining rings (A) from lamp sockets (C). Retaining Rings are shipped
installed.
2. Place glass (B) over lamp socket (C).
3. Slip white washer (H) onto lamp socket (C) so it rests on the bottom of glass (B).
4. Thread retaining ring (A) on to lamp socket (C) using socket tool provided (D) until
it rests on the white washer (H).
To Attach Shade (Figure 2)
Component Parts
E Finial
F Shade
G Threaded
Stud
1. Install shade (F) on to threaded stud (G).
2. Thread finial (E) on to threaded stud (G) until tight against shade (F).
3. Install light bulbs.
If you need further assistance, or find that you are missing any parts, please contact
the dealer from which you purchased this product. We hope you enjoy your fixture!
(Figure 1)
(Figure 2)