Hubbardton Forge 217523 - Manual (Page 2)

Installation Instructions
B193
For Aperture Vertical Sconce 21-7523F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22882
To Install Glass (Figure 2)
Component Parts
F Front Assembly
G Glass (2)
H Glass Spring
1. Slide glass (G) with dull side towards bulb into slots in front assembly
(F) until the holes in the glass (G) engage with the glass spring (H).
To Install Front Assembly
(Figures 3 & 4)
Component Parts
A Fixture
F Front
Assembly
I Cap Screw (2)
J Set Screw
1. Install light bulb (Not Included).
2. Slip front assembly (F) onto two cap screws (I) by aligning top slot and
keyed slot with the cap screws (I) installed in fixture (A). When front is
as far back as it will go slide fixture down to secure.
3. Tighten set screw (J) until snug against cap screw (I) (Figure 4).
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)
Figure 2