Hubbardton Forge 206745 - Manual (Page 2)

Installation Instructions
B47
For Forged Wave Sconce 20-6745L & 20-6745R Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 16163 Rev A
To Install Bulbs and Glass (Figure 2)
Component Parts
F Hanger Rod
G Glass
H Rubber tubing (2)
I Hanger
Bracket
J Retaining Screw
K Bulb (2)
L Bulb Shield (2)
M Socket
(2)
1. Install light bulb (K) (included). Be careful not to
touch bulb with bare hands. Oil from the hands will
dramatically reduce bulb life.
2. Thread bulb shield (L) onto socket (M). Future bulb
changes may be accomplished by snapping glass
bulb shield on and off rather than unthreading the
holder
3. Slide hanger rod (F) into holes in glass (G) from the
inside.
4. Move rubber tubing (H) outward on rod to secure
rod in glass, making sure the rod remains centered in
the glass.
5. Place hanger rod (F) into hanger bracket (I) and
secure by tightening retaining screw (J).
6. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)