Hubbardton Forge 204903 - Manual (Page 2)

Installation Instructions
B203
For Staccato Sconce 20-4903 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24415
To Install Glass (Figure 2)
Component Parts
G Socket
H Bulb (included)
I Retaining
Ring
J Glass
K Socket
Tool
1. Remove retaining ring (I) from socket (G). Retaining ring is shipped installed.
2. Install light bulb (H). Be careful not to touch bulb with bare hands; oil from
the hands will dramatically reduce bulb life.
3. Slip glass (J) over socket (G) and thread retaining ring (I) onto the socket (G)
using provided socket tool (K).
4. Restore electricity at the main breaker. If installing shade option wait to restore
electricity until after shade is installed.
To Install Optional Shade (Figure 3)
Component Parts
L Shade
M Front
Plate
1. Slip shade (L) onto fixture assembly so it rests against wall and behind
front plate (M).
2. Tighten screw cap.
3. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please
contact the dealer from which you purchased this product. We hope you
enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper
installation, lamping or use of this fixture.
(Figure 2)
(Figure 3)