Hubbardton Forge 204810 - Manual (Page 2)

Installation Instructions
B169
For Beacon Hall Wall Sconce 20-4810 & 20-4810E Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 22658
To Install Glass & Shade (Figure 2)
Component Parts
H Retaining Ring
I Shade
J Glass
Diffuser
K Socket
1. Remove retaining ring (H) from socket (K). Retaining Rings are
shipped installed.
2. Slip glass diffuser (J) over socket (K).
3. Slip center ring of shade (I) over socket until it rests on top of glass
diffuser (J).
4. Thread retaining ring (H) onto socket until it rests on top of inner
ring of shade (I). Do not over tighten.
5. Install light bulb(s) and restore electricity at main breaker.
(Fluorescent version bulbs are supplied)
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)