Hubbardton Forge 204353 - Manual (Page 2)

Installation Instructions
B282
Hobie 3-Light Sconce 20-4353 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 28084
To Install Bulb & Glass Shield (Figure 2)
Component Parts
A Fixture Assembly
H Socket
I
Bulb
J Glass Shield
1. Install bulb (I) (included). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
2. Thread glass shield (J) onto socket (H) until snug. Be sure not to over
tighten.
3. Complete steps 1 & 2 for remaining sockets.
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)