Hubbardton Forge 204350 - Manual (Page 2)

Installation Instructions
B288
Hobie Sconce 20-4350 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 28113
To Install Bulb & Glass Shield (Figure 2)
Component Parts
A Fixture Assembly
F Socket
G Bulb
H Glass Shield
1. Install bulb (G) (included). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
2. Thread glass shield (H) onto socket (F) until snug. Be sure not to
over tighten.
3. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)