Hubbardton Forge 206410 - Manual (Page 2)

Installation Instructions
B211
For Sconce 20-6410 & 20-6410F Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24635 Rev A
To Install Diffuser and Glass (Figures 2 & 3)
Component Parts
D Fixture Assembly
F Diffuser
G Glass
H 8-32 Screw (2)
I
Flat Washer (2)
1. Slip diffuser (F) into location and let rest on fixture assembly (D). Install 8-32 screws (H) and flat washers (I).
Tighten until snug. Be careful not to over tighten (Figure 2).
2. Slip glass (G) into slots on fixture assembly (D) align so glass ends protrude equal amounts (Figure 3).
3. Install light bulb. (Fluorescent supplied with fixture)
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts
please contact the dealer from which you purchased this product. We
hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by
improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 2)