A368, Installation instructions – Hubbardton Forge 103049 User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30868

Installation Instructions

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON SE-
CURELY, AND NO BARE WIRE IS EXPOSED.

6. Raise canopy (E) to the ceiling and secure loop collar (F) to

canopy loop (G).

7. Install light bulb (K). Be careful not to touch bulb with bare

hands; oil from the hands will dramatically reduce bulb life.

Note: The bulb included is based on our design preference; see the
fixture wattage sticker for Max wattage information.

8. Slip glass (M) over socket. Thread retaining ring (L) onto

socket (J) using the provided retaining ring tool (N).

9. Repeat steps 7 & 8 for remaining sockets.

10. Restore electricity at main breaker.

A368

Flora Chandelier 103049

Page 2 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Continued)