Hubbardton Forge 101281 - Manual (Page 2)

Installation Instructions
A156
For Berceau Chandelier 10-1280 10-1281 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 21220 Rev. A
To Install Glass (Figure 2)
Component Parts
I Retaining Ring (3 each for 3-arm, 5 each for 5-arm)
J Glass (3 each for 3-arm, 5 each for 5-arm)
K Washer (3 each for 3-arm, 5 each for 5-arm)
L Socket (3 each for 3-arm, 5 each for 5-arm)
M Retaining
Tool
1. Remove retaining ring (I) from socket (L). Retaining
Rings are shipped installed.
2. Place glass (J) over socket (L).
3. Place washer (K) over socket (L) until it rests on the
bottom inside of glass (J).
4. Replace retaining ring (I) and tighten with tool (M) to
secure glass. Do not over-tighten.
5. Install light bulb. Fluorescent versions bulbs are
included.
6. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)
This illustration represents a typical
fixture and may not match every style.