B315, Installation instructions – Hubbardton Forge 207812 User Manual

Page 3

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30717 Rev -

Installation Instructions

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

To Install Glass & Decorative Front

(Figures 4 - 6)

Component Parts

D Decorative Front

K Bulb (Included)

L Glass

M #8 Screw (2)

N Rubber Bumper (4)

1. Remove (2) #8 screws (M) from decorative front (D).

2. Slide glass tube (L) into decorative front (D). It may be

necessary to use supplied Rubber Bumpers to center the

Glass. If used, locate bumpers about 1/4” in from outer

edge of each ring as shown in Figure 4.

3. Secure glass (L) to decorative front (D) using (2) #8 screws

(M). (Figure 5)

4. Install bulbs (K). (Figure 6) Be careful not to touch bulb with

bare hands; oil from the hands will dramatically reduce bulb

life.

5. Slide decorative front and glass (D & L) over fixture body (B).

Line up holes in glass over bulbs.

6. Secure decorative front (D) to fixture body (B) using (4) #8

screws (C). (Figure 6)

7. Restore electricity at main breaker.

B315

Rook Bath Bar Sconce 207812

Page 3 of 3

(Figure 4)

(Figure 5)