Hubbardton Forge 277763 - Manual

Shade Installation Instructions
C39
Brindille Table Lamp 277660, 277660C, 277763 & 277763C
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 26503 Rev A
To Install Glass Diffuser (Figure 1)
Component Parts
A Finial
B Washer
C Diffuser
D Shade
E Socket
F Threaded Stud
1. Carefully unpack the lamp from the carton.
2. Remove finial (A) and washer (B) from threaded stud (F) and
save for later use. Finial and washer are shipped installed.
3. Install bulbs. “C” version bulbs are included.
4. Slip shade (D), diffuser (C) and washer (B) onto threaded stud
on top of socket (E). See Figure 2 for washer orientation.
5. Thread finial (A) onto threaded stud (F) on socket (E) and
tighten until snug. Be careful not to over tighten.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
Figure 1
Figure 2