Hubbardton Forge 207815 - Manual (Page 2)

Installation Instructions
B291
Rook Sconce 20-7815 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 28296
To Install Glass (Figures 2 & 3)
Component Parts
C Fixture
E Glass
F Bulb (Included)
G Socket
H Thumb Screw
I
Wireway Tube
1. Install light bulb (G) into socket (H). Be careful not to touch bulb with bare hands; oil from the hands will
dramatically reduce bulb life.
2. Slide glass (F) into fixture (C) aligning the slot in the glass towards the back of the fixture (C). Slide glass into
fixture until it rests on the wireway tube (J).
3. Tighten thumb screw (I) until snug. Be careful not to over tighten.
4. Restore electricity at the main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2) (Figure 3)