To install glass (figure 2), Component parts, B278 – Hubbardton Forge 207755 User Manual
Page 2: Installation instructions

Installation Instructions
B278
Erlenmeyer Vintage Platinum Sconces 20-7750 & 20-7755
Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735
28077
To Install Glass
(Figure 2)
Component Parts
A Fixture Assembly
I
Bulb (Included)
J
Glass
K Thumb Screw (3)
1. Install bulb (I). Be careful not to touch bulb with bare hands; oil from the
hands will dramatically reduce bulb life.
2. Loosen the three thumb screws (K). It is not necessary to remove them from
the fixture.
3. Raise glass (J) until groove is aligned with thumb screws (K).
4. Tighten the three thumb screws (K) equal amounts until snug with glass (J).
Be careful not to over tighten.
5. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
*
Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)