Hubbardton Forge 364901 - Manual (Page 2)

Assembly & Installation Instructions
A236
For Twilight Semi-Flush 36-4901 & 12-4910 Page 2 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735 24402 Rev B
To Install Bulb & Bottom Assembly (Figure 3 & 4)
Component Parts
A Bottom Assembly
C Screws (2)
I Socket
J Bulb (Included)
K Washer
1. Install light bulb (J). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
2. Raise bottom assembly (A) over socket (I) aligning holes in
washer (K) so the washer keyed ring goes over screws (C).
3. Turn washer (K) clockwise until it stops. Tighten two screws (C)
until snug against washer (K) (Figure 4).
4. Restore electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 3)
(Figure 4)