Hubbardton Forge 161080T - Manual (Page 2)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
30428 Rev A
Installation Instructions
To Install Glass (Figure 2)
Component Parts
C Fixture
D Barrel Knobs (3)
E Spider
F Socket
G Glass Shield
H Glass
1. Remove barrel knobs (D) from spider (E) and set them aside.
2. Install light bulb (not included).
CAUTION: TO REDUCE THE RISK OF FIRE DO NOT USE A LAMP
IDENTIFIED FOR USE IN ENCLOSED LUMINAIRES.
3. Thread the glass shield (G) onto the socket (F).
4. Raise glass (H) and align holes with spider (E). Fasten glass
(H) to spider (E) using barrel knobs (D).
5. Restore electricity at main breaker.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY
IMPORTANT SAFETY INSTRUCTIONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY:
Turn off power and allow to cool before replacing lamp.
Lamp gets HOT quickly! Contact only switch/plug when turning
on.
Do not touch hot lens, guard, or enclosure.
Keep lamp away from materials that may burn.
Do not touch the lamp at any time. Use a soft cloth. Oil from
skin may damage lamp.
Do not operate the luminaire with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
A352
Brindille Glass Pendant Vintage Platinum 161080T Page 2 of 4
(Figure 2)
E
D
C
(Figure 2- Continuity Test #1)
F
G
H