B306, Installation instructions – Hubbardton Forge 306425 User Manual

Page 4

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30069

Installation Instructions

To Install Fixture Front

(Figures 8 & 9)

Component Parts

A Fixture Front

B Slotted Screw

C Fixture Back

D Top Screw

K Gasket

O Rubber Washer

U Wire Nuts (2)

V Tape

1. Hold fixture front (A) close to fixture back (C) and using a

wire nut (U) provided, connect the red driver wire with the 2

red LED wires. Using the 2nd wire nut (U) provided, connect

the black driver wire to the 2 black LED wires. Twist wire

nuts (U) to secure wires. (Figure 8)

2. Gently push wire nuts (U) back through slits in the gasket (K)

on the fixture back (C).

3. Slip fixture front (A) onto fixture back (C). Gently press

fixture front (A) onto fixture back (C) to slightly compress

tape (V).

4. Thread top screw (D) and rubber washer (O) into top of

fixture back (C).

5. Tighten slotted screw (B) to lock fixture front (A) in place. Be

careful not to over tighten (Figure 9).

6. Restore electricity at the main breaker.

B306

Double Axis LED Outdoor Sconce Large 306425D

Page 4 of 4

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 8)

(Figure 9)

DRIVER WIRES

LED WIRES

A
C
B