B301, Installation instructions – Hubbardton Forge 206730D User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28862

Installation Instructions

To Mount Fixture to Wall & Install Glass

(Figure 1)

(Continued)

6. Slide glass (A) down into fixture, positioned between the
bent brackets (C & I) and textured bar (D), until it rests on
the support bar (J). It may be necessary to rotate one or
both adjusting nuts (B & H) clockwise for glass to fit.

7. Rotate bottom adjusting nut (H) counter clockwise until

glass (A) is snug against textured bar (D). Do not over

tighten as glass may crack. Rotate top adjusting nut (B)

counter clockwise until glass (A) is snug. Do not over

tighten.

8. Restore electricity at main breaker.

B301

Forged Vertical Bar, LED 206729D & 206730D

Page 2 of 2

This manual is related to the following products:

206729D