A366, Installation instructions – Hubbardton Forge 161140 User Manual

Page 2

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

30860A

Installation Instructions

To Install the Canopy

(Figure 1)

(Continued)

8. Raise canopy (D) close to ceiling. Align holes in canopy (D)
with holes in crossbar (A) and secure with (2) #8 screws (E).

9. If fixture needs to be lowered to achieve desired height,

loosen safety nut, push up on canopy gripper (G) and gently
pull down on supply/support cable (H). Retighten safety nut.

A366

Helix Pendant 161140

Page 2 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.