Allied Telesis AT-WA7501 - Manual (Page 85)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
85
Example
This example shows you how to use customizable filters to allow only the
wireless end devices (DHCP clients) communicating with the access point
(DHCP server) to receive TCP/IP settings. This example prevents the
wireless end devices from receiving TCP/IP settings from another DHCP
server on the Ethernet network. It also prevents the access point from
providing TCP/IP settings to DHCP clients on the wired network.
For this example, set these customizable subtype filters.
SNAP-IP-UDP-Port Port value in hexadecimal.
SNAP-IP-Protocol Port value in hexadecimal.
SNAP-IPX-Socket Socket value in hexadecimal.
SNAP-EtherType SNAP type in hexadecimal. To filter on both
SNAP type and OUI, use advanced filters.
802.3-IPX-Socket Socket value in hexadecimal.
802.2-IPX-Socket Socket value in hexadecimal.
802.2-SAP 802.2 SAP in hexadecimal.
Table 19. Subtype Filter Descriptions (Continued)
SubType Value