Allied Telesis AT-WA7501 - Manual (Page 267)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
267
To list AP monitor commands
ˆ Press any key (except the letter B, which reboots the access point),
and then press Enter. A list of AP monitor commands appears.
B
Purpose: Reboots the access point.
Syntax: B
FD
Purpose: Displays the flash file system directory, including information
about the boot file.
Syntax: FD
FR
Purpose: Finds the first executable file in the access point boot segment
and tries to run it; therefore, the first executable file in the access point
boot segment must be the boot file.
Syntax: FR
FX
Purpose: Downloads a file using Ymodem batch protocol into the flash
segment that is specified by s.
Syntax: FX s
where s is destination segment. You can use any number (1, 2, 3, or 4) to
specify the one flash memory segment on the access point.