Allied Telesis AT-WA7501 - Manual (Page 45)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
45
2. From a command prompt, type: telnet IPaddress where IPaddress is
the IP address of the access point.
3. Press Enter.
4. If necessary, enter the user name and press Enter. Then, enter the
password and press Enter. The default user name is “atilan” and the
default password is “atilan”. You can define a user name and
password. For help, see “Setting Up Logins” on page 176. The Access
Point Configuration menu appears.
Your telnet session is established.