Allied Telesis AT-WA7501 User Manual
Page 177
AT-WA7500 and AT-WA7501 Installation and User’s Guide
177
Note
Each time the service password login attempt fails, the process may
take up to 8 seconds.
If you do not want to enable RADIUS authorization, you should change the
default login user name and password. You may also want to change the
read-only password. For help, see “Changing the Default Login” on
page 178.
Configuring the Access Point to Use a Password Server
If you use a password server to manage users who can log in to this
access point, you need to tell this access point how to communicate with
the password server and then you need to configure the password server.
The password server can either be an EAS or an external RADIUS server.
To configure the access point to use a password server
1. From the main menu, click Security > Passwords. The Passwords
screen appears.
2. Check the Use RADIUS for Login Authorization check box.
3. (Optional) Make sure the Allow Service Password check box is
checked.
4. Click Submit Changes to save your changes.