Allied Telesis AT-WA7501 - Manual (Page 39)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
39
To use the Allied Telesyn AT-WA7500 Configuration Wizard
Note
To use the AT-WA7500 Configuration Wizard, you must have a PC
that is running Windows 95-OSR2/98SE/ME or Windows NT4/2000/
XP.
1. Install the AT-WA7500 Configuration Wizard on your PC. The wizard
can be downloaded either from the documentation CD that is shipped
with the access point, or from the ATI web site.
2. Extract the .zip file, double-click the .exe file, and then follow the
instructions that appear on your screen.
Note
Your PC must be on the same Ethernet segment as the access
point. Or, if your PC is communicating wirelessly with the access
point, you must have an active radio connection.
3. Start the wizard. The Allied Telesyn AT-WA7500 Configuration Wizard
window appears.
4. Select one of the following IP Address configuration options:
ˆ Configure a range of IP addresses (default)
ˆ Configure specific IP addresses
ˆ Obtain IP addresses from a DHCP server on the
network/User current addresses