Allied Telesis AT-WA7501 - Manual (Page 29)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
29
You need to configure the wireless end devices to have the same SSID,
LAN ID, and frequency as the WAP radio. You do not need to configure
any secondary LAN settings because the WAP is not connected to a
secondary LAN.
Allied Telesyn recommends that you always implement some type of
security.
Example - Configuring an 802.11a WAP With Roaming End Devices
In this example, there is one 802.11a radio in the access point and there is
one 802.11a radio in the WAP. Wireless end devices can roam between
the WAP and the access point.
Figure 12. 802.11a WAP with Roaming End Devices
Table 7. 802.11g Access Point and WAP Parameter Settings
Screen Parameter
Access Point
802.11g
WAP
802.11g
Radio-1
WAP 802.11b
Radio-2
802.11g
Radio Node Type Master Master Station
SSID Manufacturing Warehouse Manufacturing
Spanning
Tree
Settings LAN ID 11 11 11
Root
Priority 5 0 (not
applicable)
Ethernet
Bridging
Enabled Checked Checked (not
applicable)
Ethernet
Access
point
Host
WAP