Allied Telesis AT-WA7501 - Manual (Page 211)

AT-WA7500 and AT-WA7501 Installation and User’s Guide
211
To enable the EAS
1. Log in to the access point whose EAS you are enabling.
2. From the main menu, click Security > Embedded Authentication
Server. The Embedded Authentication Server screen appears.
3. Check the Enable Server check box.
4. Click Submit Changes to save your changes.
5. Configure the parameters. For help, see the next table.
6. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.