Allied Telesis AT-WA7501 - Manual (Page 124)

Chapter 4: Configuring the Radios
124
Configuring
802.11a Radio
Advanced
Parameters
1. From the main menu, click 802.11a Radio > Advanced Configuration.
The Advanced Configuration screen appears.
2. Configure the advanced parameters. For help, see the next table.
3. Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and then
click Save Changes and Reboot. For help, see “Saving Configuration
Changes” on page 46.
Table 39. 802.11a Radio Advanced Parameter Descriptions
Parameter Description
Power Output Level Set the transmitted power level:
Maximum: Sets the output power to the highest
level supported by the radio.
Medium: Sets the output power to a lower level
than the highest level supported by the radio.
Low: Sets the output power to a level higher than
the lowest level supported by the radio.
Minimum: Sets the output power to the lowest
level supported by the radio.
Lowering the power output level reduces the
radio coverage for this area and reduces the
range for this radio.