13 at-9700 series, 1 vlan information window, At-9700 series – Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER User Manual
Page 54
Allied Telesyn
AT-VIEW PLUS
VLAN MANAGER
6.13 AT-9700 Series
Topics:
•
•
6.13.1 VLAN Information Window
The VLAN Information Window displays the following attributes for each VLAN definition:
Column Name
Description
Name
This is the name of the VLAN.
Identifier
This is the unique identifier of the VLAN.
Type
This indicates the type of the VLAN.
•
1q_vlan
•
protocol
Advertisement
This specifies that the VLAN is able to join GVRP.
•
Enabled
•
Disabled
Tagged Ports
This is a list of the tagged member ports of the VLAN.
Untagged Ports
This is a list of the untagged member ports of the VLAN.
Forbidden Ports
This is a list of the forbidden member ports of the VLAN.
Note
- The current firmware version allows a maximum of 32 characters for the VLAN Name
parameter. When adding ports 1 and/or 2 as tagged/untagged ports of a VLAN whose name is of
length 32, an additional character is appended to the name thereby causing the name to exceed 32
characters. When this happens, problems may be encountered while attempting to modify or
delete this VLAN.
Note
- The current firmware version allows you to pre-configure switches that may be added to
the stack in the future. Pre-configured switches are identified by a “Non-Existing” label that
appears above the device panel in the Add VLAN and Modify VLAN dialog boxes. Ports on pre-
configured switches can be included in a VLAN but only those marked as “untagged” or
“forbidden” will appear on the VLAN Information Window. Ports marked as “tagged” will not
appear. They will appear only when a physical switch, whose box id matches the box id of the
pre-configured switch to which the tagged ports belong, is added to the stack.
PN 613-50666-00 Rev C
Page 54 of 59