Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER - Manual (Page 50)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
• If the specified Operation Mode is Private - the Core Ports and Customer Ports fields will
be ignored.
• If the specified Operation Mode is Nested - the Tagged Ports, Untagged Ports, Uplink
Ports and Private Ports fields will be ignored.
Note - User-created VLANs are classified as Multiple Type VLANs. There are three possible
VLAN associations for a Multiple Type VLAN: IP Subnet, Protocol and Port. Currently, VLAN
Manager only supports Port association. As a result, when attempting to modify a VLAN with an
association other than Port, VLAN Manager automatically changes the association of that VLAN
to Port.
Note - AT-9900 : When adding/modifying a Nested VLAN, specifying 2 or more core ports
where one of the specified ports is already a member of an existing Nested VLAN will result in
the error message: "Must return port to the default VLAN as untagged port based."
6.10.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
Input Field Valid Values Length
Name (cannot be
modified)
• Alphanumeric characters
• Underscore ("_")
• Dash ("-")
Note - VLAN names must contain at least one (1)
alphabet character.
Note - "ALL" is a reserved word and cannot be used as a
VLAN name.
1 - 15 characters
(AT-8900)
1 - 32 characters
(AT-9900)
Identifier (cannot
be modified)
1 - 4094 -
Operation Mode
(cannot be
modified) • Normal
• Private
• Nested
-
6 Device Support
PN 613-50666-00 Rev C Page 50 of 59