Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER - Manual (Page 47)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
6.9 AT-8700XL/AT-8800/Rapier Series
Topics:
• VLAN Information Window
• Add/Modify VLAN Dialogs
6.9.1 VLAN Information Window
The VLAN Information Window displays the following attributes for each VLAN definition:
Column Name Description
Name This is the name of the VLAN.
Identifier This is the unique identifier of the VLAN.
Operation Mode This indicates the operation mode of the VLAN.
Tagged Ports This is a list of the tagged member ports of the VLAN.
Untagged Ports This is a list of the untagged member ports of the VLAN.
Uplink Port This is a list of the uplink ports of the VLAN.
Private Ports This is a list of the private ports of the VLAN.
Status
This indicates the status of the VLAN.
• dynamic
• static
Note - The Operation Mode is not available if the software release version used on the AT-
8700XL is 2.6.4-00 to 2.6.4-02
Note - Adding a Private VLAN with a Private Port that has already been associated with the
Default VLAN as a Tagged Port will result to an error. However, the Private VLAN will still be
added on the device with only the Uplink Port configured.
Note - When importing the default VLAN, VLAN Manager disregards the values specified for
Untagged Ports.
Note - On Import VLAN operation, if the specified Operation Mode is Normal, the Uplink Port
and Private Ports fields will be ignored by the application.
Note - When two Private VLANs specify the same Uplink port (Uplink port is untagged for the
first Private VLAN and tagged for the second Private VLAN), modifying the Private VLAN that
has the untagged Uplink port will result in the error message: " already has an uplink, more than
one Uplink is not permitted." All ports in that Private VLAN will then be deleted.
PN 613-50666-00 Rev C Page 47 of 59