Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER - Manual (Page 19)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
Authentication Protocol
If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to specify an
Authentication Protocol that is configured for the User Account Name on the target
device.
These are the available Authentication Protocols:
MD5
Use HMAC-MD5-96 protocol
SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to specify an
Authentication Password that is configured for the User Account Name on the target
device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol. This is the
available Privacy Protocol:
DES
Use Data Encryption Standard
Privacy Password
If the Security Level is "Auth / Priv", you need to specify a Privacy Password that is
configured for the User Account Name on the target device.
Login User Name
This is the account name to be used to log in to the device. By default, this field is set to
manager. This field is used for non-L2 devices only. For L2 devices, this field is ignored.
Password
This is the password for the account to be used. This field is used for non-L2 devices
only. For L2 devices, this field is ignored.
Retry Timeout
The number of seconds VLAN Manager waits before it determines that the device is not
responding. By default, this value is set to 5 seconds.
Count
The number of times VLAN Manager sends SNMP messages to the agent before giving
up. By default, this value is set to 2 retries.
PN 613-50666-00 Rev C Page 19 of 59