Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER - Manual (Page 45)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
6.8 AT-8600
Topics:
• VLAN Information Window
• Add/Modify VLAN Dialogs
6.8.1 VLAN Information Window
The VLAN Information Window displays the following attributes for each VLAN definition:
Column Name Description
Name This is the name of the VLAN.
Identifier This is the unique identifier of the VLAN.
Operation Mode This indicates the operation mode of the VLAN.
Tagged Ports This is a list of the tagged member ports of the VLAN.
Untagged Ports This is a list of the untagged member ports of the VLAN.
Uplink Port This is a list of the uplink ports of the VLAN.
Private Ports This is a list of the private ports of the VLAN.
Status
This indicates the status of the VLAN.
• dynamic
• static
Note - When importing the default VLAN, VLAN Manager disregards the values specified for
Untagged Ports.
Note - When performing an Import VLAN operation, if the specified Operation Mode is Normal
or Protected, the Uplink Ports and Private Ports fields will be ignored by the application.
Note - When two Private VLANs specify the same Uplink port (Uplink port is untagged for the
first Private VLAN and tagged for the second Private VLAN), modifying the Private VLAN that
has the untagged Uplink port will result in the error message: " already has an
uplink, more than one Uplink is not permitted." All ports in that Private VLAN will then be
deleted.
Note - A GBIC image is always visible on the GBIC slot of the AT-A47 expansion module
image even if there is no GBIC physically inserted. Furthermore, the GBIC image will always
show an SC port regardless of the actual type of GBIC used.
PN 613-50666-00 Rev C Page 45 of 59