Allied Telesis AT-S97 - Manual (Page 63)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
63
SYSTEM SHOW ASYNCHRONOUS
Syntax
system show asynchronous
Parameters
None.
Privilege Levels
Administrator, read-write, and read-only.
Description
This command displays the baud rate setting of the management module’s
RS-232 Terminal port, used for local management of the media converter
chassis or stack. An example is shown in Figure 8.
Figure 8. SYSTEM SHOW ASYNCHRONOUS Command
To configure the port’s baud rate, use the SYSTEM SET
ASYNCHRONOUS command. For information, refer to “SYSTEM SET
ASYNCHRONOUS” on page 56.
Example
system show asynchronous
Asynchronous Port (Console) Information:
Baud Rate ............................ 115200