Allied Telesis AT-S97 - Manual (Page 191)

191
Chapter 11
Telnet Server Commands
This chapter contains the following sections:
ˆ “Overview” on page 192
ˆ “TELNET DISABLE” on page 194
ˆ “TELNET ENABLE” on page 195
ˆ “TELNET SHOW” on page 196
Note
Remember to save your parameters changes in the active master
configuration file with the CONFIG SAVE command. For information,
refer to “Saving Your Configuration Changes” on page 17 or
“CONFIG SAVE” on page 154.