Allied Telesis AT-S97 - Manual (Page 19)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
19
Within a stack, you assign the management module on the master switch
with a chassis ID of 0. You assign all of the AT-MCF2000S Stacking
modules on the slave chassis with a chassis ID of 1 through 30. For more
information about stacking, see Chapter 2, “Stacking” on page 33.
To view the ID number of a chassis, issue this command:
system show cluster
For further information, see “Displaying the Chassis Modules” on page 27
or “SYSTEM SHOW CLUSTER” on page 97.