Allied Telesis AT-S97 - Manual (Page 47)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
47
Command
Summary
Table 1 summarizes the IP configuration commands.
Table 1. IP Configuration Commands
Command Description
IP DHCP DISABLE on
page 48 Deactivates the DHCP and
BOOTP clients on the
management module.
IP DHCP ENABLE on page 49 Activates the DHCP and BOOTP
clients on the management
module.
IP SET on page 50 Manually sets the IP configuration.
IP SHOW on page 52 Displays the IP address, subnet
mask, and default gateway of the
management module.