Allied Telesis AT-S97 - Manual (Page 37)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
37
Setting Up Stacking
When creating a stack, you need to designate a master chassis and one to
seven member chassis. By default, the management module has a
chassis id of 0 which automatically designates this chassis the master
chassis of the stack. For instructions about how to move the jumper, see
“Setting Chassis ID Numbers” on page 18.
To designate a member switch, set the chassis ID of each stacking
module to 1 through 30 by moving DIP switches on the module. You must
assign a unique chassis ID to each member chassis.
To view the chassis IDs of the master and member chassis, use the
SHOW CLUSTER command. See “SYSTEM SHOW CLUSTER” on
page 97.