Allied Telesis AT-S97 - Manual (Page 219)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
219
DIAGNOSTICS SHOW MODULE
Syntax
diagnostics show module id= chassis / slot
Parameters
id Specifies a module. You can view only one module at a
time. The ID consists of the following parts:
chassis Specifies the ID number of a chassis. The range
of a chassis ID is from 0 to 31.
slot Specifies the slot number of the media converter
module with the port. Possible values are:
1 or 2 Specifies a slot number of a media
converter slot. In the AT-MCF2000
Chassis, the left slot is 1 and the right
slot is 2.
m Specifies the management module
slot. Either the management module
or the stacking module can be
installed in this slot.
Privilege Levels
Administrator, read-write, and read-only.
Description
This command displays manufacturing and operational information about
the modules in a chassis. You might need to provide this information in the
event you contact Allied Telesis Technical Support for assistance. Figure
43 on page 220 is an example of the information.