Add a wi-fi network manually, Advanced settings – Samsung SCH-R890ZKAUSC User Manual
Page 96
.
1.
From the Home screen, touch
Apps
➔
Settings
➔
.
Wi-Fi. Touch OFF/ON to turn Wi-Fi on.
Add a Wi-Fi Network Manually
1. From the Home screen, touch
Apps
➔
Settings
➔
2. Touch
3. On the pop-up Wi-Fi settings screen, touch Add Wi-Fi
Network (below the scanned networks), then enter
these fields:
• Network Name (SSID): Enter the name of the Wi-Fi network.
• Security: Select the type of security used by the Wi-Fi network.
• Password: If the network is secured, enter the password.
• Show advanced options: Select the Proxy settings and IP
settings for the network.
4. Touch Connect to save the settings and connect to
the network.
Advanced Settings
Set up and manage wireless access points.
2. Touch
Wi-Fi. Touch OFF/ON to turn Wi-Fi on.
Menu for options:
3. Touch
• Advanced:
–
Network notification: Send a notification when an open
network is available.
–
Keep Wi-Fi on during sleep: Specify when to switch from
Wi-Fi to mobile data for data communications when the phone
goes to sleep (when the backlight goes out).
–
MAC address: View your device’s MAC address (not
configurable).
–
IP address: View your device’s IP address (not configurable).
• WPS push button: Set up a connection to a WPS (Wi-Fi
Protected Setup) router or other equipment.
• WPN PIN entry: View the PIN used by your phone to set up a
PIN-secured connection to a Wi-Fi router or other equipment
(not configurable).
• Help: Learn about setting up and using Wi-Fi networks.
89