Samsung SCH-U350ZIAATL - Manual (Page 31)

Understanding Your Contacts 28
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold for Voice Service.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name or #.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 73.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press .
5. The contact information for the name you selected appears
in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1. In standby mode, do one of the following:
• Press Menu ( ) and select Contacts ➔ Find.
• Press the Navigation key Down.
The FIND screen appears in the display with an
alphabetical list of Contacts showing.
2. Enter the first few characters of the name of the contact as
it appears in your Contacts list.