Samsung HMX-S10BN-XAA - Manual (Page 147)

ENGLISH
147 147
故 故障 障排 排除 除： ： 自 自我 我診 診斷 斷顯 顯示 示
自 自我 我診 診斷 斷顯 顯示 示
檢 檢査 査淸 淸單 單
✤ 聯絡服務人員之前，請閱讀橙檢査下表0 若問題仍然存在，請就近與 Samsung 經銷商或
授權的服務中心/人員聯絡0
沒有足觀的可用空間儲存圭案0
未裝入紙張或裝入不正確0
賓紙或出現其他列印錯誤0
墨水量低0 金詣嫄捧0
未連接 USB 纜線或連接不正確0
電池電量不足0
未揷入記憶賓或損毁0
記憶賓尙未格式化0
無法寫入圭案0
無法讀取圭案0
圭案受保護0
Memory Full!
Paper Error!
Print Error!
Ink Error!
Connect USB
Cable!
Low Battery!
Card Error
Not formatted!
Write Error!
Read Error!
Protect!
檢査內部或外部記憶體的空間0
檢査印表機中的紙張0
如果沒有紙張，請裝入紙張0
檢査印表機訊息0 有關詳情，請參閱印
表機手冊0
請更換墨水或爺粉0
檢査 USB 的連接0 斷開然後嘗試再次
連接0
爲電池組充電或連接到交流電源適配器0
更換小型 SD 賓0
格式化小型 SD 賓或替換已格式化的賓0
檢査記憶體空間或小型 SD 賓的格式化0
刪除損壞/損毁的圭案0
刪除受保護的圭案，刪除前解除保護
鎖定0
表 表示 示… … 操 操作 作 顯 顯示 示
沒有電源0
日期/時間錯誤
對焦無法自動調整
無法正確裝入小型
SD 賓0
圖片的色彩平衡不
自然0
電源未正確來接0
電池耗盡0
電池過冷0
未設定日期/時間0
對焦模式設定爲手動0
在過暗的地方進行錄製0
鏡頭被冷凝的水覆蓋0
記憶賓裝入錯誤0
記憶賓揷槽中有異物0
白平衡設定不適合錄製情況0
正確連接至交流電源適配器，第
24 頁0
替換新的電池組，
加熱電池或將央移到比較溫暖的
地方0
設定日期/時間，第 42 頁0
將對焦模式設定爲 0
使用閃光測速器或加亮地點0
淸楚鏡頭上的水珠然後檢査對焦0
正確裝入記憶賓，第 33 頁0
淸除記憶賓揷槽中的雜質0
設定正確的白平衡，第 69 頁0
症 症狀 狀 可 可能 能的 的原 原因 因 採 採取 取的 的措 措施 施
Troubleshooting : Self-Diagnosis Display
Self-Diagnosis Display
Checklist
✤ Before contacting service personnel, please read and check following table. If the problem
continues, contact your nearest Samsung dealer or authorised service center / personnel.
Symptom Possible Causes Measure
Not enough free space for saving files.
The paper is not inserted or set
improperly.
Paper jam or other printing error
occurred.
Ink is low.
USB cable is not connected or set
improperly.
Battery Power is low.
The mini SD card is not inserted or
damaged.
The mini SD card is not formatted.
Failed to write a file.
Failed to read a file.
The file is protected.
Memory Full!
Paper Error!
Print Error!
Ink Error!
Connect USB
Cable!
Low Battery!
Card Error
Not formatted!
Write Error!
Read Error!
Protect!
Check the space of internal memory or
the external memory.
Check the paper in the printer.
If there is no paper, insert paper.
Check the printer message. Refer to the
printer manual for details.
Replace ink or toner.
Check the USB connection. Disconnect
and try to connect again.
Charge the Battery Pack or connect the
AC Power Adapter.
Replace the mini SD card.
Format the mini SD card or replace with a
formatted one.
Check the memory space or format of the
mini SD card.
Delete the damaged / corrupted file.
To delete a protected file, unlock the
protection prior to deletion.
Informs that… Action Display
No Power is supplied.
Date/Time is wrong
Focus does not adjust
automatically
The mini SD card will
not load properly.
Color balance of the
picture is not natural.
The power is not connected properly.
The battery is dead.
The battery is too cold.
The Date/Time is not set.
Focus mode is set to manual.
Recording was done in a too-dark place.
Lens is covered with condensation.
The mini SD card is inserted improperly.
Foreign substances are in the memory
slot.
White balance setting is not suitable
for the recording situation.
Connect the AC Power Adapter
properly, page 24
Replace with a new Battery Pack.
Warm up the battery or move it to a
warmer place.
Set the Date / Time, pages 42
Set the focus mode to .
Use a strobe or light the place.
Clear the lens and check the focus.
Insert the mini SD card properly,
page 33.
Clear the memory slot.
Set proper white balance, page 69.