beautypg.com

Samsung SGH-A877RBZATT User Manual

Page 75

background image

Changing Your Settings 71

Note: The MEdia Net WAP and AT&T MMS are pre-configured and cannot be

altered on this screen. Your phone is set up by default for connecting to
the network.

3.

To create a new connection, touch

.

4.

Select the parameter you want to edit:

• Set Name: enter a profile name.

• Access Name: edit the access point name.

• Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

• User ID: enter the User ID required to connect to the network.

• Password: enter the user password required to connect to the

network.

• Protocol: set the connection protocol used by the WAP browser:

WAP, HTTP, or Other.

• Home URL: enter the URL address of the page to be used as your

homepage.

• Proxy Address: MEdia Net set as the proxy server address and

port.

• Linger Time (sec.): set a time period (in seconds) after which the

network is disconnected if there has been no new data traffic in that
time.

• Advanced Settings: allows you to configure some of the IP-specific

information: Static IP, Static DNS, Server information, and Traffic
Class.

Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.

Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.

Traffic Class: select the traffic class.

Note: The WAP settings may vary depending on the service provider.

5.

Touch

to store these new settings.

IMS Settings

IMS is the method used to connect to the server in order set up
the Video Share option.

1.

From Idle mode, touch

Settings

Connectivity

IMS Settings.

2.

Touch one of these options:

• IMS Service allows you to set the IMS service to On or Off.

Touch

to store the new setting.

Create

Save

Save

a877 Impression.book Page 71 Thursday, May 13, 2010 3:29 PM

This manual is related to the following products: