Samsung SGH-A877RBZATT - Manual (Page 158)

154
Changing the WAP Profiles
Connection can be made via either one of three available
connection profiles: MEdia Net, AT&T MMS (MultiMedia Server),
or AT&T IMS. Use this menu to create and customize the profiles
containing the settings for connecting your phone to the network.
You need these settings to use the WAP browser or to send MMS
messages or Email messages.
Note: Although the active connection can be changed by the user, it is
recommended that this choice be made with the assistance of either
the retailer or customer service representative.
1. In Idle mode, touch ➔ Mobile Web ➔ ➔
Browser Profiles.
2. Touch one of the following profiles:
• MEdia Net
• AT&T MMS
• AT&T IMS
Caution!: The WAPs are pre-configured and can not be altered using this
screen. If you change the settings without first checking with your
service provider, the web browser, MMS, and e-mail features may
not work properly.
3. To create a new connection profile, touch and follow
the onscreen prompts.
– or –
To edit an existing profile, touch a profile from list, scroll to
the desired field, and use the onscreen keypad/keyboard
to edit the parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
WAP or HTTP.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Gateway Address: (WAP only) enter the gateway address of the
proxy server.
• Proxy Address: (HTTP only) set the proxy server address and port.
• Secure Connection: (WAP only).
Create
a877 Impression.book Page 154 Thursday, May 13, 2010 3:29 PM