Samsung SPH-M910ZIASPR - Manual (Page 85)

1G. Camera 73
Ca
me
ra
Camera Settings
1. From camera mode ( ), you can also move
the camera mode slider (right of the screen) to the
camcorder position (
) (to switch from
camera to camcorder and record videos).
– or –
Touch and slide open (to the right) the camera’s
side panel
and adjust any of the following
options:
Ⅲ Camera settings to access camera hardware
settings:
● Scene mode to select an camera setting for
better image capture under different lighting
environments. Choose from:
Auto (default),
Portrait , Landscape , Night , Beach , Snow ,
Sunset , and Fireworks .
● White balance to compensate for color
differences found within different lighting
conditions. Choose from:
Auto (default),
Incandescent , Daylight , Fluorescent , or Cloudy .
● Color effect to apply different color effects onto
images. Choose from: None (default), Mono ,
Sepia , Negative , Aqua , or Whiteboard .
● Metering determines the way in which the
camera determines the exposure. Choose
from:
Matrix , Center (default), or Spot .
● Store location to store the actual location
(latitude and longitude) where the image was
taken so the photo can later be displayed on
Google Maps or used in other social
applications.
● Picture size to set the size of your image.
Choose from: 3M Pixels , 2M Pixels , 1M Pixel , or
VGA Pixels .
● Picture quality to set the image quality for your
image. Choose from: Super fine , Fine , or
Normal .
● Focus mode to set the focal properties of the
camera lens. Choose from Auto (default),
Infinity , or Macro (close up images).
SPH-M910_BasicsGuide.book Page 73 Wednesday, June 9, 2010 3:56 PM