Samsung SPH-I325DLASPR - Manual (Page 63)

Se
ttin
g
s
Section 2B. Your Device’s Settings 49
Power Management
You can conserve battery power by adjusting the time
out settings for the display, keypad, display backlight or
adjusting the display brightness.
Another new feature is the use of the Task Manager
that allows to more effectively manage battery life by
determining memory and processor usage by
manually turning off any unused applications. This
section also provides you with an additional indication
of your current main battery charge level.
Reviewing the Battery Charge Level
ᮣ From the standby mode, press Start > All Programs >
Settings > Power Management .
Changing the Backlight Time-Out
Select the length of time the display backlight stays on
when you do not use the device.
1. From the standby mode, press Start > All Programs >
Settings > Power Management > Backlight time out .
Ⅲ Choose Never , 5 seconds , 10 seconds , 15 seconds ,
30 seconds , or 60 seconds .
2. Press the navigation key left or right to select a new
time out setting and press
Done (left softkey).
Changing the Display Time-Out
Select the length of time the display stays on while on
either a direct connection to a power supply or when
functioning off battery power.
1. From the standby mode, press Start > All Programs >
Settings > Power Management > Display time out on AC
or Display time out on Battery .
Ⅲ During standby, the device goes into sleep mode
after a specified period of time to conserve power.
Choose
Never , 10 seconds , 15 seconds , 30 seconds ,
1 minute , 2 minutes , 5 minutes , or 10 minutes .
2. Press the navigation key left or right to select a new
time-out setting and press
Done (left softkey).
Note Long backlight time-out settings reduce the battery’s
talk and standby times.
I325.book Page 49 Monday, October 27, 2008 12:20 PM