Samsung SPH-I325DLASPR - Manual (Page 162)

148 Section 2L. Synchronizing with ActiveSync
Connecting with Your Computer
You can connect the device to your computer by one
of two methods:
ⅷ Using a USB cable (page 147).
ⅷ Using a Bluetooth connection (requires a COM port
assignment).
Using Bluetooth with ActiveSync
1. Ensure that your computer's Bluetooth radio is
turned on and visible.
Ⅲ Your Bluetooth device will occupy a COM port
when actively in use on a USB port.
2. Pair your device and your computer.
Ⅲ Press Start > All Programs > Settings > Connections >
Bluetooth .
Ⅲ Select Add new device.. and press . (See “To
pair your phone with another Bluetooth device:”
on page 131.)
3. Right-click the ActiveSync icon found in your
taskbar and select the
Connection Settings option.
4. Check the Allow connections to one of the following
option and choose the COM port used by your
Bluetooth device from the drop-down list.
5. Ensure that the Open ActiveSync when my device
option is checked, and click OK .
6. Right-click the ActiveSync icon found on your
computer's taskbar and select the
Connection
Settings option.
7. Click Connect.. to initiate the wireless
synchronization process.
Note The Bluetooth transmitter should be connected to an
available USB port. Refer to the Bluetooth device's
manual for specific setup and configuration
instructions.
I325.book Page 148 Monday, October 27, 2008 12:20 PM